Nice ROBO600

32 pages

To Next Page

To Next Page

Loading...

EN - Instructions and warnings for installation

For sliding gates

Nice

ROBO600

Table of Contents

Questions and Answers:

P
Patrick BrownAug 6, 2025
What to do if Nice ROBO600 radio transmitter lights up but doesn't control the gate?
- A
  Amanda PerezAug 6, 2025
  If the LED on your Nice Fencing & Gates radio transmitter lights up but the gate doesn't respond, verify that the transmitter is correctly memorized in the radio receiver. To check the radio signal, press a key and place the LED on the transmitter near the antenna of a radio tuned to 108.5MHz FM. A slight crackling sound should indicate the signal is transmitting correctly.
M
Mrs. Carolyn ColemanAug 13, 2025
Why Nice ROBO600 system doesn't start and the OK LED doesn't flash?
- B
  bethany56Aug 13, 2025
  If your Nice Fencing & Gates system isn't starting and the OK LED isn't flashing, ensure the product is receiving 230V mains power. Also, check fuses F1 and F2 (fig. 7) to see if they have blown. If so, determine the cause of the failure and replace them with fuses of the same current rating and specifications.
F
frankkellieAug 21, 2025
How to fix Nice ROBO600 when the radio transmitter doesn't control the gate and the led doesn't light up?
- F
  Felicia GordonAug 21, 2025
  If your Nice Fencing & Gates radio transmitter's LED doesn't light up and it's not controlling the gate, the first step is to check the transmitter batteries. If they're exhausted, replace them.
H
Heather LeeAug 28, 2025
What to do if Nice ROBO600 Fencing & Gates doesn't start and the flasher is off?
- A
  anthonycatherineAug 28, 2025
  If your Nice Fencing & Gates system isn't starting and the flasher is off, check if the command is being received. If the command reaches the Step-by-Step input, the OK LED will flash twice to confirm the command was received.

Nice ROBO600 Specifications

General

Brand	Nice
Model	ROBO600
Category	Fencing & Gates
Language	English

Summary

General Warnings and Safety

Installation Warnings

Crucial safety guidelines for installing the automation system.

Product Description and Intended Use

Product Description

Details the electromechanical gearmotor and its features.

Application Limits

Specifies gate dimensions and usage conditions for the product.

Installation

Package Contents and Components

Lists and illustrates package items and typical installation components.

Installation Steps

Step-by-step guide for physically installing the gearmotor and rack.

Electrical Connections

Types of Electrical Cables

Specifies recommended cable types and maximum lengths for connections.

Electrical Cable Connections

Details specific terminal connections for system components.

Starting Automation and Checking Connections

Hooking Up to the Mains

Instructions for connecting the automation to the power supply by an expert.

Learning the Devices

Procedure for the control unit to recognize connected devices.

Testing and Commissioning

Testing Procedures

Steps to verify the functionality of the automation system and safety devices.

Commissioning Process

Final steps to prepare the system for handover to the owner.

Programming

Adjustable Parameters (Trimmers)

Explains adjustment of operating time, pause time, and force.

Programmable Functions

Details functions controlled by micro switches for customization.

Integrated Radio Receiver

Information on radio transmitter memorization and management.

Further Details

Adding or Removing Devices

How to connect and configure additional safety devices like photocells.

Power for External Devices

How to connect and power external accessories.

Oview Programmer Connection

Instructions for connecting the Oview programming unit.

Total Deletion of Memory

Procedure to reset the control unit to factory default settings.

Special Functions

Explains features like the "Always open" function.

Diagnostics

Control Unit Signals

Explains the meaning of LED indicators on the control unit for fault diagnosis.

Troubleshooting

Common Problems and Solutions

Lists common problems and their solutions for the radio transmitter and maneuvers.

Disposal of the Product

Product Disposal Guidelines

Instructions on safely and responsibly disposing of the product.

Maintenance

Regular Maintenance Checks

Recommendations for periodic servicing to maintain system safety and function.

Technical Specifications

Product Specifications

Lists detailed technical data for the gearmotor and radio receiver.

EU Declaration of Conformity

Declaration of Conformity

Official statement of compliance with EU directives.

Essential Safety Requirements

General Warnings

Key safety precautions for operating and interacting with the automated gate.

Manual Release Mechanism

How to manually operate the gearmotor for opening/closing the gate.

Maintenance Operations

Guidelines for safe cleaning and maintenance of system components.

Transmitter Battery Replacement

How to replace the battery in the radio transmitter.