Nice RUN1500 - User Manual

Nice
RUN1500
For sliding gates
EN - Instructions and warnings for installation and use

Summary

General Safety Warnings and Precautions

General Warnings

General safety instructions and warnings for installation and use.

Installation Warnings

Warnings related to the proper installation of the automation system.

Installation

Pre-Installation Checks

Checks required before starting the installation process.

Installing the Gearmotor

Step-by-step guide for mounting the gearmotor unit.

Adjusting the Mechanical Limit Switches

Procedure to set the gate's open/close limits.

Manually Unlocking and Locking the Gearmotor

Electrical Connections

Preliminary Checks

Wiring Diagram and Description of Connections

Diagrams and explanations for wiring.

Final Checks and Start-Up

Choosing the Direction

Power Supply Connection

Device Learning

Process for the control unit to recognize connected devices.

Leaf Length Learning

Checking the Gate Movement

Testing and Commissioning

Testing

Steps to test the automation system's functionality.

Commissioning

Final procedures before putting the system into service.

Programming

Using the Programming Buttons

Level 1 Programming Procedure

Level 2 Programming Procedure

Maintenance Notice Function

Troubleshooting

Troubleshooting

Table of common problems and recommended solutions.

Anomaly Log

Signalling Through Warning Light

Explains warning light flash codes.

Signals on the Control Unit

Further Information (Accessories)

Adding or Removing Devices

STOP Input

Photocells

Gearmotor in SLAVE Mode

How to configure for dual-leaf automation.

Learning of Other Devices

Connecting and Installing the Back-up Battery

Product Maintenance

Technical Specifications

Instructions and Warnings for the User

Nice RUN1500 Specifications

General

Brand	Nice
Model	RUN1500
Category	Garage Door Opener
Language	English