Nice RUN1500 - Technical Specifications

ENGLISH – 27
TECHNICAL SPECIFICATIONS
12
12 TECHNICAL SPECIFICATIONS
l
All technical specications stated in this section refer to an ambient temperature of 20°C (± 5°C). Nice S.p.A.
reserves the right to apply modications to the product at any time when deemed necessary, without altering
its functions and intended use.
Table 16
TECHNICAL SPECIFICATIONS
Description Technical specication
Pinion
Pinion Z: 18
Module: 4
Pitch: 12.6 mm
Primitive diameter: 72 mm
Maximum inrush torque
(corresponds to the ability to generate
the necessary force to move the leaf)
35 Nm
(1000 N)
Nominal torque
(corresponds to the ability to generate
the necessary force to move the leaf)
20 Nm
(560 N)
Nominal torque speed
0.18 m/s
No-load speed
(the control unit allows for
programming 6 speeds approximately
equal to: 100, 85, 70, 55, 45, 30%)
0.25 m/s
Maximum frequency of operation in
cycles/hour (for a standard 4-metre
gate)
60
The control unit limits the cycles to the maximum value specied in Table 1 and Table 2
Maximum continuous operating time
10 minutes
Application limits
The Run devices are generally able to automate gates with weight and length within the
limits specied in Table 1 and Table 2
Maximum peak power input
(corresponding to amperes)
400 W
Dimensions and weight
400 x 255 h 390; 19 kg