Need help?Do you have a question about the Nice Toona TO4006 and is the answer not in the manual?
General| Model | TO4006 |
|---|---|
| Power supply | 230 V AC |
| Operating temperature | -20°C to +50°C |
| Protection level | IP44 |
| Max. leaf length | 3 m |
| Maximum Gate Width | 3 m |
| Protection Class | IP44 |
Crucial safety instructions and warnings for personal safety during installation and use. Read carefully.
Guidelines for safe installation, including suitability checks and power disconnection procedures.
Verify component integrity, model suitability, and environmental conditions before installation.
Assess the mechanical structure of the gate and its surroundings for automation compatibility.
Confirm gate leaf size and weight fall within the product's specified limits using Graph 1.
Plan the automation system layout, component placement, and necessary connection diagrams.
Steps for installing rear and front brackets and the gear motor assembly.
Configure mechanical limit switches for precise gate leaf opening and closing positions.
Connect the gear motor to the control unit following specific wiring diagrams and safety protocols.
Initiate system operation only after all inspection phases are successfully completed.
Perform thorough inspection of all automation components for safety and compliance.
Regularly maintain the automation system, checking for wear and tightness of parts.
Follow local regulations for environmentally sound disposal of the product at its end-of-life.
Determine estimated product durability by calculating the demand index and referencing Graph A.
Procedure to manually unblock the gear motor using the key and handle for emergency access.
Procedure to manually block the gear motor by turning the key and closing the protection.
To Next Page
