English – 26
8.3 - Connecting boom lights
01.
IMPORTANT! - Refer to the instruction manual of the light cable to check warning details.
Proceed as indicated in the image below:
WIDE L
WIDE S
WIDE M
b
d
STOP
MANUAL
RED
BLACK
8.4 - Connecting photocells within the barrier mechanism (cabinet)
You can install the TX or RX photocell inside the barrier mechanism cabinet in the space provided.
01. Proceed as indicated in the image below:
a - remove the card of the photocell from its box by levering with a screwdriver. CAUTION! - Do not damage the internal electrical
components
b - open the box prepared for the photocells that is in the box of small hardware parts
a
b
c - t the card onto the bottom of the box
d - make a hole through the rubber prepared for passing the electrical cable
e - connect it to the photocell card (see also Fig. 5 - Sect. 4)
c d e
RX
TX
To Next Page
Loading...
