NICEDAY CT11 - Assembly Instructions: Base Setup; Step 1: Assembling Leg Tubes; Step 2: Unfolding and Securing Vertical Tube

ASSEMBLY INSTRUCTIONS
STEP 1 : Assemble the Front leg tube(13) and the Rear leg tube(14)
1. Remove the pre-assembled M10*70 bolts (23) from the Leg tubes
2, Connect the leg tubes to the Mainframe (10) with the M10*70 bolts(23).
3. The square bolt ends should snugly insert into the square holes on the leg tubes.
STEP 2: Unfold the vertical tube from the mainframe(10)
Unfold the vertical tube(10-1 ) from the mainframe(10). Insert the vertical tube(10-1) into the
base tube(10-2). Bolt A should stay on top of the elliptical groove at last.
10-1
10-2
-3-