NICEDAY CT11 - Assembly Instructions: Handles; Step 5: Attaching Pulse Handle; Step 6: Assembling Main Handles

STEP5: Attach the Pulse handle(9)
1. Remove preassembled M8*30 Screw(18) from top of the vertical tube.
2. Attach the Pulse handle(9) to the vertical tube with the M8*30 Screw(18). Press the
Screw cover(4) to the middle of the pulse handle.
STEP6: Assemble the handle
1. Remove preassernbled M8*42 Bolts(20) from the Handles(1 )(2).
2. Attach the Left handle(1 ) and Right handle(2) to the rockers with M8*42 Bolts(20).