Nicepower SPS3010D - Specification

SPECIFICATION
1. Switchable DC regulated power supply
Model Number R-SPS305/305D R-SPS3010/3010D R-SPS605/605D R-SPS1203/1203D R-SPS1503/1505
Output Voltage —-0~30V 0~30V 0~60V 0~120V 0~15/0~15V
Output Current 0-5 0~10A O~SA 0~3A 0~3A0~5A
Input Voltage: 230V+10% 50Hz (115V+10% 60HZz)
Working Temperature: 0°C~40°C; Relative Humidity: <80%RH
Storage Temperature: -10°C~70°C; Relative Humidity: <70%RH
Constant Voltage State: Voltage stabilitys0.1%+3mV Low Voltage:0.2~0.3%+3mV
Load stabilitys0.5%+3mV
Ripple noises30mVrms
Constant Current State: Current stabilitys0.2%+3mA
Load stabilitys0.2%+3mA
Ripple noises20mArms (valid value)
Display Accuracy: 0.5%+2digits
Display Resolution: Voltage:00.01V Current:0.001A
Product Dimension: long223mm X wide93 X high145
Product Weight 1.2Kg 1.2Kg 1.2Kg 1.2Kg 1.2Kg
Fuse Standard 3A(AC 220V Input)/5A(AC 110V Input)
The above parameters are measured at an ambient
temperature of 25+ 5°C, relative humidity: <80%RH, and
preheated for 30 minutes. The actual parameters will vary
slightly.
SPECIFICATION
Switchable DC regulated power supply
Model
Number
SPS305/805D
SPS30103010D
SPS605/605D
SPS1203/1203D
_
SPS1503/1505
Output
Voltage
o~30v
—
o~30V
0~60V
0~120V
0~15/0~15V
Output
Current
o~5A
0~10A
O~SA
0~3A
0~3A/0~5A
©
Input Voltage: | 230V410% 50Hz (115V+10% 60Hz)
Working Temperature: 0°C~40°C; Relative Humidity: <80%RH
Storage Temperature: -10°C~70°C; Relative Humidity: <70%RH
Constant
Voltage
State:
Voltage
stabilitys0.1%+3mV
Low
Voltage:0.2~0.3%+3mV
a
ee
NY
CeCe
waery
TOrIey
Load stabilitys0.5%+3mV
Ripple noises30mVrms
Constant Current State: Current stabilitys0.2%+3mA
Load stabilitys0.2%+3mA
Ripple noises20mArms (valid value)
Display Accuracy: 0.5%+2digits
Display Resolution: Voltage:00.01V Current:0.001A
Product
Dimension:
long240mm
X
wide
85
X
high
155
Product
Weight
1.2Kg
1.2Kg
—
1.2Kg
1.2Kg
1.2Kg
—$_$___>
eae
ee
NS
ee
Fuse
Standard
3A(AC
220V
Input)/5A(AC
110V
Input)
The above parameters are measured at an ambient
temperature
of
25
+
5°C,
relative
humidity:
<80%RH,
and
preheated for 30 minutes. The actual parameters will vary
slightly.