Nicepower SPS3010D - Fuse Replacement; Product Maintenance; Product Warranty; Packing List

automatically switch to constant current mode. The output
current remains stable and the output voltage decreases
proportionally as the load increases further. The conversion of
constant voltage and constant current is indicated by the LED on
the front panel.
CV indicator light is on during constant voltage, CC indicator is
on when constant current.
FUSE REPLACEMENT
lf the fuse blows, the power supply will stop working. To find and
correct the cause of the blown fuse, then replace it with a fuse of
the same specification.
Replace the fuse of same
specification, then put the fuse
cabin back.
Remove the power plug first, then open
the fuse cabin according to the
illustration.
“eR
Fuse cabin is in the power socket.
For effective safety protection, it is only necessary to
. replace the fuse of a specific specification. Before
replacing the fuse, the power must be turned off and the
HIGH VOLTAGE! power cord must be unplugged from the power outlet.
DANGER!
11
4 SS =
PRODUCT MAINTANCE
1. Disconnect the power when the product is not in use.
2. Unplug the power supply before cleaning.
3. Do not use hydrocarbons, chlorides or similar solvents, or
use abrasive cleaners.
PRODUCT WARRANTY
1. This product is offered free maintenance service within one
year from the date of purchase. Except in the following cases:
A: Lack of this product warranty card
B: Failures caused by improper use, such as improper handling
and improper repair, modification or adjustment of the device.
C: Consumable materials are not covered by the warranty.
D: Naturally irresistible disasters such as floods, fires,
earthquakes, etc.
2. Maintenance costs are charged for repairs that exceed the
warranty period, and the costs incurred for maintenance are the
responsibility of the user.
PACKING LIST
1x Power Supply
1x Power Cord
1x Output Load Cord
1x User’s Manual
1x Warranty Card
12