Niche Zero - Grinding Process and Operation

10
Using the Niche Zero
4. Replace grind cup on
tray underneath.
5. Close lid (Niche Zero will
not operate if the lid is
open) and ick power
switch up, to switch on.
6. You will hear a change in
motor noise when the Niche
Zero has nished grinding.
We recommend to leave it
running for a few more seconds,
to make sure all the beans
have been processed, before
switching o.
7. For espresso, t portalter
over grind cup.
8. Invert grind cup and
portalter, shake and tap
grind cup, then remove.
9. For other brewing methods,
pour ground coee direct
from grind cup into chosen
receptacle.