Niche Zero - Using the Niche Zero; Preparation and Grind Setting

9
Using the Niche Zero
Before use remove all packaging.
Plug into outlet, the red LED will glow to show there is power to the Niche
Zero. Your Niche Zero has been factory calibrated and adjusted to seng 20.
1. Open lid and rotate the bean
funnel to the desired grind
seng, matching white dot
on bezel to grind dial number.
Turn clockwise to go ner
(espresso) and anclockwise to
go coarser (press pot). Ensure
you do this with no beans in the
grinder funnel as shown. When
adjusng ner aer coarse
grinding, run the Niche Zero
briey (1 second) every me
the adjustment ring is moved 10
marks on the scale. This ensures
any trapped coee between
the burrs does not strain the
adjustment mechanism and
makes adjusng easier. When
adjusng coarser, the above
procedure is unnecessary.
2. Weigh beans in grind cup, be
vigilant and inspect the beans
to ensure no foreign objects,
that could damage the burrs.
This is also the me to remove
any defecve beans such as
quakers (unusually light beans
compared to others) and blacks
(very dark beans). This all helps
taste in the cup.
3. Open lid and pour beans in
bean funnel.