Niche Zero - Important Safeguards; General Safety Precautions

3
Important Safeguards
When using electrical appliances, basic safety precauons should
always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE
WARNING: Misuse of this
appliance may cause injury.
1. Before using for the rst
me please ensure that
your electricity supply is the
same as shown on the rang
label on the underside of the
Niche Zero. If you have any
concerns, please contact your
local electricity company.
2. Never use a plug without the
fuse cover ed. Always make
sure a replacement fuse is the
same rang as the original.
3. If the supply cord or plug is
damaged, or if the appliance
malfuncons or has been
damaged in any manner; it
must be replaced or repaired
by the manufacturer, its
service agent or similarly
qualied persons in order to
avoid a hazard.
4. Replacement fuses should
be approved to BS 1362
(UK only).
5. Any plug cut from its power
supply cord should be
disposed of immediately.
Inserng a cut-o plug into an
electrical socket is dangerous.
6. The Niche Zero features an
overheat cut-out that cuts the
power if it becomes too hot
for any reason. If this occurs,
unplug the grinder. The safety
cut-out will automacally
reset itself within 1 hour and
the power will be restored
when the Niche Zero is
plugged in again.
7. Do not place the Niche Zero
on or near a hot gas or electric
burner, or where it could
touch a heated surface.