22
Rev. 2 – 10
th
November2015
Do NOT Change the SET SPEED register when the fan is not set for MODBUS and for SPEED
CONTROL application.
Changing the fan type may affect the correct functioning of the fan.
If the fan type loaded is different from the fan received,Nicotra||Gebhardt aftersales
dept. must be contacted.
Default Values
In table 2 are indicated all the available Modbus parameters, the purpose is to guarantee a restoring
RED REGISTERS
can’t be modified.
GREY REGISTER
can be modified but only by Nicotra||Gebhardt technicians
GREEN REGISTER
can be modified by the end user within the limits indicated in this manual.
Table 2 – Default settings