24
Rev. 2 – 10
th
November2015
REDUCING THE MAX SPEED
In figure 27 is shown the behavior of the fan by reducing the MAX SPEED through the modification of the
register number 2 into the Modbus Holding Register
Fig.27 – DDMP Reducing the MAX SPEED limits – Example DDMP 10/8 (see also fig. 13)
REDUCING THE MAX POWER
In figure 28 is shown the behavior of the fan by reducing the MAX POWER through the modification of the
register number 36 into the Modbus Holding Register
Fig.28 – DDMP Reducing the MAX POWER limits – Example DDMP 7/7
To Next Page
Loading...
Need help?
General
