Nidec NE300-4T0075G/0110PB Quick Start Guide

73 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Part Number：31019007

www.drive-setup.com

Quick Start Guide

NE200/NE300

Variable Speed AC drive

Table of Contents

Other manuals for Nidec NE300-4T0075G/0110PB

User Manual244 pages

Questions and Answers:

L
Lisa CherryAug 22, 2025
What to do if my Nidec DC Drives show motor overload?
- D
  Darren NewtonAug 22, 2025
  If your Nidec DC Drives indicate a motor overload, several factors could be responsible. First, check the input power source for any abnormalities. Ensure the motor's rated current is correctly configured in the settings. If the V/F curve isn't suitable, adjust it along with the torque boosting performance. For motors consistently operating with heavy loads at low speeds, consider using a specialized electric motor. Also, verify that neither the motor nor the load is blocked or experiencing sudden, large load changes. Finally, if the motor power is insufficient, use a motor and drive with appropriate power ratings.
J
joseph05Aug 23, 2025
What causes over current in Nidec DC Drives during acceleration and how to fix it?
- M
  Monica MillerAug 25, 2025
  Overcurrent during acceleration in Nidec DC Drives can stem from a few reasons. If the acceleration time is too short, increase it. Also, check the input power source for low voltage. Finally, if the drive power rating is too small, choose a drive with higher capacity.
R
Regina WilliamsAug 25, 2025
What causes over current at constant-speed in Nidec NE300-4T0075G/0110PB?
- J
  Jason BenjaminAug 26, 2025
  If you're experiencing overcurrent at a constant speed with your Nidec DC Drives, several factors could be the cause. Check the load for any abnormal mutations. Also, verify the input power source isn't experiencing low voltage. Ensure your drive has sufficient power capacity. Finally, if you're using closed-loop vector control, inspect the encoder and its wiring for any sudden disconnections.
E
Erica FreemanAug 26, 2025
What to do if Nidec NE300-4T0075G/0110PB show drive overload?
- J
  Joshua BarnesAug 27, 2025
  If your Nidec DC Drives are showing a drive overload, first check the input power source for low voltage. If the load is too heavy, select a drive with a bigger capacity. If the acceleration is too fast, increase the acceleration time. Also, avoid restarting the motor while it's still turning.
B
Betty MurphyAug 27, 2025
What causes over current in Nidec NE300-4T0075G/0110PB DC Drives during deceleration?
- A
  acamachoAug 27, 2025
  Overcurrent during deceleration in Nidec DC Drives can occur due to several reasons. If the deceleration time is too short, increase it. If there is a large load inertia, add suitable brake devices. Finally, if the drive power rating is too small, choose a higher capacity drive.
L
Lisa TerryAug 28, 2025
What to do if my Nidec NE300-4T0075G/0110PB DC Drives show over voltage in deceleration?
- J
  Jermaine MurrayAug 29, 2025
  If your Nidec DC Drives are showing an overvoltage during deceleration, the deceleration time may be too short, so increase it. Also, if the load inertia is large, add suitable brake devices.
M
Marisa AndersonAug 30, 2025
How to fix heat-sink over heat in Nidec DC Drives?
- I
  irussellAug 30, 2025
  To resolve heat-sink overheating in Nidec DC Drives, first lower the ambient temperature. If the fan is damaged, replace it. Also, ensure the fan air duct is clear of any blockages.
B
Brandon SheltonAug 31, 2025
What to do if my Nidec DC Drives show over voltage in constant speed?
- A
  anitahillAug 31, 2025
  If your Nidec DC Drives are showing an overvoltage at constant speed, first check the input power source for abnormalities. If the load inertia is large, add suitable braking devices.
L
lynnpetersonSep 1, 2025
What to do if my Nidec DC Drives show over Voltage in Acceleration?
- K
  Kevin MaciasSep 1, 2025
  If your Nidec DC Drives display an overvoltage during acceleration, it could be due to a too short acceleration time, so increase it. Another possible cause is an abnormal power supply, so check the input power source.
E
Emily PadillaSep 3, 2025
What to do if Nidec DC Drives show fast current limit fault?
- D
  Daniel LoweSep 3, 2025
  If your Nidec DC Drives are showing a fast current limit fault, it could be due to a load that is too large or a motor blocked to stall, so decrease the load and check the motor and mechanical part status. If the drive power rating is too small, choose a higher power drive. If the drive output circuit loop is grounded or short-circuited, remove the external fault.

Nidec NE300-4T0075G/0110PB Specifications

General

Brand	Nidec
Model	NE300-4T0075G/0110PB
Category	DC Drives
Language	English

Related product manuals

Nidec NE300-4T0055G/0075PB

Nidec NE300-4T0300G/0370P

Nidec NE300-4T0750G/0900P

Nidec NE300-4T0900G/1100P

Nidec NE300-4T0110G/0150PB

Nidec NE300-4T0150G/0185PB

Nidec NE300-4T0220G/0300PB

Nidec NE300-4T2800G/3150P-F

Nidec NE300-4T2000G/2200P-U

Nidec NE300-4T1320G/1600P-D

Nidec NE300-4T3550G/4000P-F