What causes bus under voltage during running of Nidec NE300-4T0150G/0185PB?
A bus under voltage during the operation of Nidec DC Drives is caused by power grid low voltage, so check the input power source.
What to do if Nidec NE300-4T0150G/0185PB DC Drives show ground fault?
If your Nidec DC Drives are indicating a ground fault, it could be due to a short circuit in one of the output phases. Check whether the electric motor insulation is weakening. Also, check whether the wiring between the frequency converter and the electric motor is damaged.
What to do if Nidec DC Drives show load short-circuit?
If your Nidec DC Drives are displaying a load short-circuit error, check whether the electric motor coil is short circuit. If the inverting module IGBT is damaged, ask for the services from manufacturers.
What to do if Nidec NE300-4T0150G/0185PB show output phase loss?
If your Nidec DC Drives are showing an output phase loss, check the U-V-W motor wiring. Also, if there is a serious unbalance in output, check the load.
What to do if Nidec DC Drives show input phase loss?
If your Nidec DC Drives are indicating an input phase loss, it means the input RST has phase loss or imbalance, so check input voltage.
Detailed technical specifications for NE200/300 series drives, covering control modes, startup torque, and voltage ratings.
Diagram illustrating the connection of the drive to power supply, motor, and peripheral devices.
Critical safety precautions and guidelines for proper main circuit wiring to prevent damage and ensure safety.
Overview of the drive's keypad interface, including button descriptions and indicator meanings for operation.
Explanation of protection mechanisms and fault parameters (FC group) for ensuring safe operation and diagnosing issues.
Comprehensive table of trip codes, possible causes, and recommended solutions for diagnosing and resolving drive faults.
Guidance on diagnosing general abnormal situations and applying appropriate countermeasures for drive issues.
To Next Page
General