What causes bus under voltage during running of Nidec NE300-4T3550G/4000P-F?
A bus under voltage during the operation of Nidec DC Drives is caused by power grid low voltage, so check the input power source.
What to do if Nidec NE300-4T3550G/4000P-F show ground fault?
If your Nidec DC Drives are indicating a ground fault, it could be due to a short circuit in one of the output phases. Check whether the electric motor insulation is weakening. Also, check whether the wiring between the frequency converter and the electric motor is damaged.
What to do if Nidec NE300-4T3550G/4000P-F DC Drives show load short-circuit?
If your Nidec DC Drives are displaying a load short-circuit error, check whether the electric motor coil is short circuit. If the inverting module IGBT is damaged, ask for the services from manufacturers.
What to do if Nidec NE300-4T3550G/4000P-F DC Drives show output phase loss?
If your Nidec DC Drives are showing an output phase loss, check the U-V-W motor wiring. Also, if there is a serious unbalance in output, check the load.
What to do if Nidec DC Drives show input phase loss?
If your Nidec DC Drives are indicating an input phase loss, it means the input RST has phase loss or imbalance, so check input voltage.
Detailed technical specifications for NE200 and NE300 drives.
Diagram showing connections between the drive and peripheral devices.
Important considerations and precautions for main circuit wiring.
Safety warnings and precautions related to the use of the drive.
Safety warnings and precautions related to the installation of the drive.
Safety warnings and precautions related to wiring the drive.
Description of parameters for vector control (F3 group).
Description of parameters for protection and faults (FC group).
Information on fault codes, possible causes, and solutions.
To Next Page
General