Need help?Do you have a question about the Nidec Unidrive M700 and is the answer not in the manual?
General| Control Modes | Speed, Torque, Position |
|---|---|
| Cooling Method | Air-cooled, Liquid-cooled |
| Control Method | Vector control |
| Communication Protocols | Ethernet/IP, PROFINET, PROFIBUS, EtherCAT, CANopen, Modbus TCP/RTU, RS485 |
| Protection Rating | IP20 |
| Overload | 150% for 60 seconds |
| Feedback | Incremental encoder, resolver |
| Safety | STO (Safe Torque Off) |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short-circuit |
| Operating Temperature | -10°C to +50 °C |
| Storage Temperature | -40°C to +70°C |
| Humidity | Up to 95% relative humidity, non-condensing |
To Next Page
