Need help?Do you have a question about the Nidec Control Techniques Digitax-SF DA23823 and is the answer not in the manual?
General| Model | DA23823 |
|---|---|
| Type | Servo Drive |
| Enclosure Rating | IP20 |
| Series | Digitax SF |
| Control Method | Vector Control |
| Communication Protocols | EtherCAT, CANopen |
| Cooling Method | Fan |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
| Operating Temperature | 0°C to +40°C |
| Humidity | 5% to 95% (non-condensing) |
| Input Voltage | 200-240V AC |
Crucial safety warnings, precautions, and standards to follow before operating the product.
Guidance on environmental requirements, precautions, and mounting procedures for drives and motors.
Comprehensive list and explanation of all drive parameters, categorized by function.
Detailed procedures and examples for positioning operations.
Detailed explanation of Internal Position Command and Homing operations.
Step-by-step guide for Quick Tuning and Final Tuning in Position and Velocity Control Modes.
Detailed parameters for Inertia Ratio, Control Gain, Filters, and other tuning aspects.
Detailed list of warnings, their symptoms, causes, and recommended remedies.
Comprehensive list of alarms, their symptoms, causes, and recommended remedies.
To Next Page