What to do if a maintenance message is displayed and the Nidek Medical Lex 1000 stops?
If a maintenance message appears and the Nidek Medical Edger stops, it indicates an abnormality. Press the button to reset the device. Address the issue as described in the maintenance message. Should the message reappear, please contact NIDEK or your authorized distributor.
Why does a part of the displayed lens shape blink on the layout screen of my Nidek Medical Lex 1000 Edger?
If a part of the displayed lens shape blinks on the layout screen after measuring the lens shape with your Nidek Medical Edger, it means the lens diameter is insufficient. To resolve this, press the button to release the lens and replace it with a larger one, or adjust the layout.
What to do if processing does not start even though the button is pressed on Nidek Medical Edger?
If processing doesn't start when you press the button on the Nidek Medical Edger, make sure lens layout settings have been entered. Also, the device might be trying to process a lens that has already been processed. Press the R/L button to switch the side of the lens to be processed.
Why does tracing restart automatically on my Nidek Medical Edger?
If tracing restarts automatically, and the LEDs of the and buttons blink for a few seconds, and you can't read trace data even when pressing the button on your Nidek Medical Edger, it means there's a circumference difference of 1 mm or more between the right and left rims. Use single-eye tracing to resolve this.
What to do if the stylus comes off the groove during tracing with Nidek Medical Edger?
If the stylus comes off the groove during tracing, and tracing stops, and the LED of the button keeps blinking on your Nidek Medical Edger, press the button to return the stylus to its original position and trace the frames again. If the stylus comes off because the frames are sharply warped, perform goggle type frame tracing.
How to fix a Nidek Medical Lex 1000 Edger with a screen that is not displayed?
If the screen is not displayed when you turn on the power switch of your Nidek Medical Edger, ensure the power plug is properly connected to a power outlet. If it still doesn't work, replace the fuses.
General| Grooving | Yes |
|---|---|
| Drilling | Yes |
| Safety Beveling | Yes |
| Frame Tracer | Yes |
| Beveling | Yes |
| User Interface | Touchscreen |
Provides an overview of the NIDEK patternless edger Lex 1000 and its features.
Details the front, rear, and internal components of the Lex 1000 edger.
Instructions for connecting and configuring the optional Lex Drill unit.
Procedures for configuring network settings for small-scale networks.
Illustrates the sequence of operations from power on to processing completion.
Steps for powering the instrument on and off safely and correctly.
Guide to entering lens data, processing parameters, and layout settings.
Procedures for blocking lenses using pliable cups or nano cups.
Detailed steps for performing auto, guided, and EX lens beveling.
Instructions for performing basic flat edging and grooving for nylor frames.
Procedures for preparing, importing, and performing lens drilling.
Checklists for ensuring proper instrument function before and after use.
Guidance on identifying and resolving common instrument problems.
Instructions for dressing the instrument's processing wheels for optimal performance.
Steps for periodic replacement of processing water and stocking filters.
Procedures for calibrating the tracing unit for accurate measurements.
List of consumable items and replacement parts with order numbers.
Description of safety mechanisms like the motorized chamber door and self-diagnosis.
Detailed technical data including processing modes, lens capabilities, and ranges.
List of standard accessories included with the Lex 1000 instrument.
To Next Page
