Need help?Do you have a question about the Nidek Medical Le 1000 and is the answer not in the manual?
General| Type | Edger |
|---|---|
| Manufacturer | Nidek Medical |
| Polishing | Yes |
| Edging Wheel | Diamond |
| Edging Materials | Plastic, Polycarbonate, High-index, Trivex |
| Edging Size | 30-80mm |
| Beveling | Yes |
| Grooving | Yes |
| Safety Beveling | Yes |
| Lens Diameter Range | 30-80mm |
Lists parts that can be replaced, their references, and required adjustments.
Provides guidelines and notes before starting part removal procedures.
Step-by-step instructions for opening the main device top cover assembly.
Details the process for removing various external covers of the device.
Steps for replacing the main board (Part No. 44401-BA01).
Procedure for replacing the inverter (Part No. 80607-00027).
Procedure for removing and attaching the device wheels.
Instructions for replacing the grooving and safety bevel finishing wheels.
Steps for removing and replacing the tracing unit assembly.
Instructions for replacing and using the feelers for lens measurement.
Procedure for replacing the entire feeler assembly (Part No. 40340-4100).
Steps for removing and replacing the lens measurement unit assembly.
Procedure for replacing the safety beveling/grooving assembly.
Instructions for replacing the spindle assembly.
Instructions for removing and replacing the brushless motor assembly.
Steps for removing and replacing the processing chamber assembly.
Provides essential notes and preparation steps for performing settings and adjustments.
Manages software and firmware updates and system configurations.
Adjusts mechanical parts to ensure proper operation and accuracy.
Configures parameters for electrical components like motor inverters.
Performs essential calibrations for accurate device operation.
Tunes processing parameters for optimal lens finishing.
Diagram illustrating the electrical connections of the device.
Lists common problems and their corresponding solutions and measures.
To Next Page
