SD Series
Operating & Safety Instructions
USA 03/12
Table of Contents
1 INTRODUCTION AND GENERAL INFORMATION PAGE
1.1 Foreword 2
1.2 Scope 3
1.3 Introducing the SD34T Self Drive (SD) Series 3
1.4 General Specification 4
1.5 Identification 5-6
1.6 EC Declaration of Conformity 7
2 SAFETY
2.1 Mandatory Precautions 8-11
2.2 Environmental Limitations 11
2.3 Noise & Vibration 11
2.4 Test Report 12
3 PREPARATION AND INSPECTION
3.1 Unpacking 13
3.2 Preparation for Use 13
3.3 Pre-Operational Safety Check Schedules 14-15
3.4 Placard, Decals and Installation 16-17
3.5 Torque Requirements 18
4 OPERATION
4.1 Control Circuit Components 19-21
4.2 Setting up Procedures 22
4.3 Ground Control Operation 23-24
4.4 Basket Control Operation 25-27
4.5 Driving Controls 28
4.6 Batteries and Charging 29-31
4.7 Transporting, Towing, Craneage, Storage and Setting to Work 32-34
5 EMERGENCY CONTROLS
5.1 General 35
5.2 Emergency Procedures - Incapacitated Operator 35
5.3 Emergency Procedures - Machine Failure 35
5.4 Incident Notification 35
6 RESPONSIBILITIES
6.1 Changes in Ownership 36
6.2 Manual of Responsibilities 36
6.3 Inspection/Service/Pre-Hire Check List 37-38
To Next Page
