Need help?Do you have a question about the nifty TM40 and is the answer not in the manual?
Purpose of manuals, importance of reading, operator responsibility.
Information covered, reference to workshop/parts manuals for technical details.
Overview of TM40 series, its capabilities, design features, and model variations.
Key technical specifications like height, outreach, capacity, controls, and power sources.
Details manufacturer's identification plate and its importance.
Manufacturer's declaration of conformity with EU directives for machinery and EMC.
Essential safety rules, operator responsibilities, and hazard avoidance for machine operation.
Operating limits related to temperature, dust, and wind speed.
Information on airborne noise emissions and vibration levels during operation.
Summary of type testing and individual machine testing procedures for safety and stability.
Procedures for removing transit restraints and verifying suitability for lifting.
Mandatory systematic inspection before first use and importance of reading the manual.
Daily, weekly, monthly, and annual safety checklists for machine inspection.
List of all required placards and decals with their part numbers for USA specification.
Specifies correct tightening torques for screws, wheel nuts, and gear ring bolts.
Details on control board, klaxon, boom-switch, battery isolator, and power source selection.
Step-by-step guide for deploying outriggers and preparing the machine for operation.
Instructions for operating the machine using ground controls, including engine start and boom functions.
Instructions for operating the machine using basket controls, including engine start and boom functions.
Procedures for recharging batteries, troubleshooting, and safety precautions during charging.
Guidelines for transporting, towing, craneage, and storing the Niftylift machine.
Information on the optional traction drive, including engaging and disengaging the system.
Importance of checking emergency controls daily and operator familiarity.
Procedure to follow if the operator becomes incapacitated while in the basket.
Steps for lowering the basket using manual pump during machine failure or overload.
Requirement to report any accident or incident involving the Niftylift.
Seller's duty to notify Niftylift of ownership changes for technical bulletins.
Requirement to read and understand responsibilities as per ANSI/SIA standards.
Comprehensive checklist for pre-hire, inspection, and service checks of the machine.
General| VESA Compatibility | 200 x 200 mm to 400 x 400 mm |
|---|---|
| Material | Steel |
| Color | Black |
| Maximum Load Capacity | 40kg |
| Weight Capacity | 40 kg (88 lbs) |
| Width | Adjustable |
To Next Page