3.3 PRE-OPERATIONAL SAFETY CHECK SCHEDULES
Before use at the beginning of the work shift, the aerial basket shall be given a visual inspection and
functional tests including, but not limited to the following. It is recommended that these be performed
at regular intervals as indicated on each checklist.
3.3.1 DAILY SAFETY CHECKS
1) Check that all labels (decals) are in place and legible.
2) Visually inspect the machine for damaged or loose components.
3) Check that batteries are charged
4) Check the fuel level (if applicable).
5) Check that canopies/covers and guards are in place and secure.
6) Check that the boom rest switch is operable (if applicable).
7) Check that control levers are secure and operate freely.
8) Check that operating buttons and emergency stop buttons function properly.
9) Check the operation of the emergency hand pump.
10) Visually inspect all hydraulic hoses and fittings for damage or leaks.
11) Check operation of the outrigger alarm.
12) Check that outrigger footpads are secure.
13) Check that the basket pivot pins and their tag bolts are secure.
14) Check security and operation of the boom clamp.
3.3.2 WEEKLY SAFETY CHECKS
1) Inspect tyres and wheels for damage and wear.
2) Check tyres for correct pressure. 65psi (4.5 bar)
3) Check fenders for security and damage.
4) Check battery fluid levels and specific gravity (after charging) and general condition.
5) Check hydraulic oil level, ISO Grade 22 (Europe), Grade 32 (Rest of World).
6) Inspect the engine air filter and clean or replace if necessary.
7) Check that the tow hitch ball lock, breakaway cable/chain and jockey wheel are secure.
8) Check operation and security of outrigger micro switches in conjunction with the alarm system.
9) Inspect hose track for damage or missing parts.
To Next Page
Loading...