NIIMBOT K3 - USB Connection; Bluetooth Connection

09 · 10
Installation Steps:
2
1) Turn o the printer (O).
2) Connect the USB data cable to the USB po on the back of the printer
and then connect it to the printer.
3) Turn on the printer.
02.Bluetooth Connection
Press the power button to turn on the printer.
1
Open the "NIIMBOT" APP.
2
Select the printer and follow the on-screen instructions to connect.
3
02-4 Communication Connection
01.USB Connection
This printer suppos the following communication inteace standard:
Type-B cable.
1