Nikon 1 J1 Reference Manual

161
n
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connec-
tor and AC adapter.
1
Ready the camera.
Open the battery-chamber (q) and
power connector (w) covers.
2
Insert the EP-5C power connector.
Be sure to insert the connector in the
orientation shown, using the connec-
tor to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the con-
nector is fully inserted.
3
Close the battery-chamber cover.
Position the power connector cable so
that it passes through the power con-
nector slot and close the battery-
chamber cover.

Nikon 1 J1 Specifications

General

Sensor	CMOS
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Battery	EN-EL20 Rechargeable Li-ion Battery
Lens Mount	Nikon 1 mount
Dimensions	106 x 61 x 29.8 mm
Sensor Size	13.2 x 8.8 mm
Autofocus System	Hybrid autofocus (contrast-detect/phase-detect)
Continuous Shooting Speed	Up to 60 fps
LCD Screen	3.0-inch, 460, 000 dots
Video Recording	1080p Full HD at 30 fps
Storage Media	SD/SDHC/SDXC
Shutter Speed	1/16000 to 30 sec