Need help?Do you have a question about the Nikon AF-S 28-300mm f/3.5-5.6G ED VR and is the answer not in the manual?
General| Focal Length | 28-300mm |
|---|---|
| Maximum Aperture | f/3.5-5.6 |
| Lens Mount | Nikon F |
| Elements/Groups | 19 elements in 14 groups |
| Diaphragm Blades | 9, rounded |
| Filter Size | 77 mm |
| Angle of View | 75° - 8°10' |
| Maximum Reproduction Ratio | 0.32x |
| Autofocus | Yes |
| Format Compatibility | FX/35mm |
| Image Stabilization | Yes |
| Minimum Focus Distance | 50 cm (19.68 inches) |
| Dimensions | 83 x 114.5 mm (3.27 x 4.51 inches) |
| Weight | 800 g (1.76 lbs) |
Details on specific indicating positions for groove widths on camera lens parts.
Procedures for disassembling outer barrel components like plates, rings, and filters.
Step-by-step disassembly for major lens units like G units, mount, and SWM.
Disassembly of internal components including FPCs, brushes, rings, and tubes.
Disassembly of the aperture, 3rd lens-G, cam ring, and VR units.
Disassembly of the fixed ring unit and its associated switches, gears, and rings.
Disassembly of the 2nd lens-G straight ring unit and related cam rings.
Detailed steps for assembling the 2nd lens-G straight ring unit.
Steps for applying grease and assembling the fixed ring unit and switch.
Procedures for assembling the gear and zoom ring units.
Assembly of zoom stop key unit and 3-5th connection tube unit.
Steps for assembling the 3rd lens-G unit and aperture unit.
Procedures for assembling fixed tube unit and retainer plate.
Assembly of 2nd lens-G straight ring unit and zoom brush.
Assembly of cover ring unit and fixed ring unit.
Assembly of focus key, brush, GMR FPC, and MF ring.
Cautionary notes and procedure for mounting the SWM unit.
Procedure for inspecting and adjusting GMR output waveform using test equipment.
Procedure for inspecting and adjusting flange-back focal distance.
Procedure for inspecting and adjusting the AF-contact pin position.
Details necessary adjustments for electrical devices VR unit and aberration compensation.
Summary table of adjustments needed for various replaced parts.
List of tools required for lens repair and adjustment.
Instructions for creating a self-made tool for GMR encoder output waveform inspection.
To Next Page