What to do if the ready-light does not light up on my Nikon autofocus speedlight SB-80DX?
If the ready-light does not light up, it could be due to two reasons: 1. Battery power is weak: Replace the batteries. 2. The standby function is activated: Deactivate the standby function.
What to do if Nikon autofocus speedlight SB-80DX shooting distance range does not appear?
If the flash shooting distance range does not appear, the flash head may be adjusted to a position other than the horizontal/front or down -7° position. Adjust the flash head to the correct position.
What to do if ready-light blinks after firing with Nikon autofocus speedlight SB-80DX Camera Flash?
If the ready-light blinks for 3 seconds after firing, and the underexposure indicator blinks with the amount of underexposure displayed, it suggests that underexposure may have occurred. To resolve this, adjust your settings to prevent underexposure.
What to do if no D, DE, or DF indicator appears in TTL auto flash mode with Nikon autofocus speedlight SB-80DX Camera Flash?
If no D, DE, or DF indicator appears in TTL auto flash mode, the camera’s exposure mode or metering system may not be correctly set, or a non-CPU lens might be mounted. To fix this, ensure the camera’s exposure mode and metering system are correctly set, or use a CPU lens.
What to do if the aperture indicator displays “FEE” on my Nikon autofocus speedlight SB-80DX?
If the aperture indicator displays “FEE” and the shutter cannot be released, the aperture on the lens is not set at its minimum. Set the aperture on the lens to its minimum to resolve this.
What does it mean when the underbar blinks on Nikon autofocus speedlight SB-80DX Camera Flash?
If the underbar blinks, the flash head is tilted down –7°. Adjust the tilt of the flash head.
What does it mean when the zoom-head position indication blinks on Nikon Camera Flash?
If the zoom-head position indication blinks, “Emergency mode” is set to ON. Turn off emergency mode.
What does it mean when M above the “ZOOM” blinks on Nikon autofocus speedlight SB-80DX?
If a small M above the “ZOOM” indication blinks, “Canceling the power zoom function” is set to ON. Turn off the canceling power zoom function.
What does it mean when GK indicators and zoom-head position blink on Nikon autofocus speedlight SB-80DX?
If the GK indicators and the zoom- head position blink, the built-in wide-flash adapter is used in the FP High-Speed Flash sync mode. Change the flash sync mode.
What does it mean when K blinks on Nikon autofocus speedlight SB-80DX Camera Flash?
If K blinks, the SB-80DX is removed from the camera while the K setting is ON. Ensure the SB-80DX is attached while K setting is ON.
Introduction and thanks for purchasing the SB-80DX speedlight.
Advice on using the speedlight correctly and maintaining it.
Table categorizing Nikon cameras and their compatible flash modes.
Identification and description of the SB-80DX's physical components.
Explanation of the indicators and symbols displayed on the SB-80DX's LCD.
Description of the function of each button on the SB-80DX.
How to configure various operations and personalize the speedlight's functions.
Information on CPU and non-CPU Nikkor lenses and their use with the SB-80DX.
Instructions for inserting and using AA-type batteries in the SB-80DX.
Procedure for test firing the flash to confirm exposure settings.
How the standby function automatically turns off the speedlight to save power.
Steps for mounting the SB-80DX on a camera and positioning the flash head.
Guide on setting the ISO sensitivity for film or digital cameras.
How to manually or automatically adjust the zoom-head position for coverage.
How to set camera exposure modes (P, S, A, M) and metering systems.
Instructions for selecting the flash mode on the SB-80DX, like TTL or Manual.
Guidance on composing shots and shooting with the speedlight's flash.
Instructions for using the SB-80DX with Nikon COOLPIX digital cameras.
Overview of all flash modes supported by the SB-80DX.
Detailed explanation of TTL and D-TTL auto flash modes for balanced exposure.
Tables showing camera compatibility with TTL/D-TTL auto flash modes.
How to use the Non-TTL auto flash mode for any camera and lens combination.
Instructions for using the Auto Aperture flash mode with Digital SLRs and CPU lenses.
How to use manual flash mode to control flash output and shooting distance.
Information on maximum continuous firings and synchronization.
Methods for verifying correct exposure using test firing.
How to adjust exposure for subjects or backgrounds and modify flash output.
How to determine shooting distance with zoom lenses having variable apertures.
Using slow-sync for low light and red-eye reduction features.
Using rear-curtain sync for motion blur and modeling light for preview.
How the AF-assist illuminator helps focus in low light conditions.
Techniques for bouncing light off surfaces for softer shadows and portraits.
Using the wide-flash adapter for close-up photography with softer shadows.
Methods for using multiple flash units to eliminate shadows or emphasize shape.
Connecting multiple flash units with cords for advanced lighting setups.
Diagram showing connections for TTL multiple flash setups.
Operating multiple flash units wirelessly for creative lighting.
List and description of accessories for multiple flash and external power.
Guidelines for cleaning, storage, and operating environment of the speedlight.
Information on usable batteries, handling, and precautions.
Solutions for common problems and warning indicators with the SB-80DX.
Technical details and performance data for the SB-80DX speedlight.
General| TTL Flash Control | Yes |
|---|---|
| Manual Flash Control | Yes |
| Auto Aperture Flash | Yes |
| Stroboscopic Flash | Yes |
| Bounce | Yes |
| Swivel | Yes |
| Color Temperature | 5600K |
| AF Assist | Yes |
| Guide Number | 38 m (125 ft) (ISO 100, at 35 mm zoom head position) |
| Flash Coverage | 24-85mm |
| Power Source | 4 x AA batteries |
| Weight | 350 g (12.3 oz) without batteries |
| Compatible Cameras | Nikon cameras with i-TTL |
| Manual Power Settings | M1/1, M1/2, M1/4, M1/8, M1/16, M1/32, M1/64 |
| Flash Exposure Compensation | ±3 EV in 1/3 steps |
| Wireless TTL Flash | Yes |
| Swivel Angle | 180° |
| Tilt Angle | 90° |
To Next Page