What to do if my Nikon autofocus speedlight SB-900 Camera Flash SB-900 does not fire?
The Nikon Camera Flash SB-900 may not fire due to several reasons: * The custom setting “Canceling flash firing” might be activated, so you should cancel it. * The master and remote flash units might be too close to each other. Ensure they are placed at an appropriate distance. * The SB-900’s temperature may have risen. Allow it to cool down naturally.
Why does the flash shooting distance range not appear on my Nikon autofocus speedlight SB-900 Camera Flash SB-900?
The flash shooting distance range may not appear because: * The flash head is not set to the horizontal/front position. To resolve this, set the flash head to the horizontal/front position. * Aperture information has not been received from the camera. Confirm the camera setting and mount the SB-900 to a camera. * The SB-900 cannot receive the focal length information from the camera. Try turning off the SB-900 and camera, and then turn them on again.
How to fix zoom position when it does not set automatically on Nikon autofocus speedlight SB-900 Camera Flash?
If the zoom position on your Nikon Camera Flash does not set automatically, it could be due to: * The built-in wide-flash adapter being in use or the Nikon Diffusion Dome being attached. Remove these attachments or set the custom setting “Zoom position setting if the built-in wide-flash adapter is broken off accidentally” to manual. * The power zoom function being canceled. Activate the auto power zoom function.
Why my Nikon Camera Flash power cannot be turned on?
If you can't turn on your Nikon Camera Flash, it might be due to: * Incorrectly installed batteries. Make sure to insert the batteries correctly. * Weak battery power. Try replacing the batteries with new ones.
What to do if the ready-light does not light up on Nikon Camera Flash?
If the ready-light on your Nikon Camera Flash does not light up, it could be due to: * The standby function being activated. Turn on the power. * Weak battery power. Replace the batteries.
What to do if Nikon Camera Flash SB-900 does not work when any button is pressed?
If the Nikon Camera Flash SB-900 does not work when any button is pressed, it is likely that the control buttons are locked. Cancel the key lock to restore functionality.
Why is my Nikon autofocus speedlight SB-900 Camera Flash SB-900 making a strange sound?
If your Nikon Camera Flash SB-900 is making a strange sound with the flash head zooming back and forth, it's likely due to weak battery power. Replace the batteries to resolve this issue.
Learn how to navigate the manual using various search methods.
Identify and understand the different parts of the Speedlight.
Find information on operating the Speedlight and its settings.
Essential warnings and cautions for safe operation of the Speedlight.
Verify that all accessories are present in the package.
Discover the key features and capabilities of the SB-900 Speedlight.
List of cameras compatible with the SB-900 Speedlight.
Explanation of the Nikon Creative Lighting System (CLS) features.
Detailed diagram and explanation of SB-900 components.
Step-by-step guide to setting up and using the Speedlight.
Understanding the function and usage of each control button.
Explanation of LCD panel displays, icons, and settings.
Icons representing different flash modes available on the LCD.
Overview of custom functions and their corresponding icons.
Guide on how to properly insert and manage batteries for the Speedlight.
Instructions on how to configure the i-TTL flash mode for automatic exposure.
How to set up the Auto aperture flash mode for automatic flash output.
Guide to configuring the Non-TTL auto flash mode for manual control.
How to set up the distance priority manual flash mode.
Instructions for using the manual flash mode for precise control.
How to configure the repeating flash mode for stroboscopic effects.
Guide on tilting and rotating the flash head for bounce effects.
Adjusting flash output to fine-tune subject exposure without changing background.
Setting up and using the advanced wireless lighting system.
How to use the SB-900 with cameras not supporting CLS.
Solutions for common problems and error indicators.
Guidance on cleaning, storage, and operating the Speedlight.
Accessory for stable placement of remote flash units.
Details on the internal electronic components and design.
Reference tables for guide numbers based on zoom position and illumination.
Data on battery performance for flashes and recycling times.
General| Compatible Cameras | Nikon i-TTL compatible cameras |
|---|---|
| Zoom Range | 17-200mm |
| Recycling Time | Approx. 2.3 sec. (with Ni-MH batteries), approx. 4.0 sec. (with alkaline batteries) |
| Exposure Control | Manual |
| Power Source | 4 x AA-size batteries (Alkaline, Ni-MH, Lithium) |
| Dimensions | 78.0 x 146.0 x 118.5 mm (3.1 x 5.7 x 4.7 in.) |
| Weight | 415 g (without batteries) |
| Wireless Communication | Nikon Creative Lighting System (CLS) |
| Wireless Operation | Master, Remote |
| Color Temperature | Approximately 5600K |
| Guide Number | 34-48 (ISO 100, in meters, at 35mm zoom head position) |
| Flash Duration | 1/880 sec at full power |
To Next Page