Nikon CoolPix 4100 - Page 19

VAA30001-R.3636.A
- D14 ･ E4100 -
・ Take out 2 screws ( ①：M1.4 × 3.5) to separate the 2nd lens frame from the shutter.
・ Rotate the turning tube to the full up position, to reduce the lens-barrel size.
・ Remove the shutter unit by lifting it in the direction of the arrow.
①
Shutter
2nd lens frame
Turning tube
Shutter unit
Note : The 2nd lens group unit (frame) cannot be replaced with a new one.