Nikon CoolPix 4100 - Connecting the Camera to the Computer; Calibration Software

VAA30001-R.3636.A
- A22 ･ E4100 -
8. Connecting the camera to the computer
1) Insert the camera connector of USB cable in the notch of the camera’s USB port.
2) Connect the cable to the USB port on PC.
USBポートへ
USBケーブル
ACアダプター
To USB port
USB Cable
AC Adapter
9. Calibration software
・ Turn on the power switch of the camera.
・When the calibration software starts, the following is displayed on the PC monitor.