VAA30001-R.3636.A
- A20 ･ E4100 -
ADJUSTMENT
1. Equipment
IBM compatible PC/AT • AC adapter EH-62B • USB cable ( UC-E6)
2. Servicing tools
• Pattern box • Color meter • Luminance meter • Siemens star chart • Calibration software (J65066)
•Adjustment collimator (J63090) or Adjustment rmware
3. Adjustment items and order
1. Lens adjustment
2. AWB adjustment
3. CCD white dot defect compensation
4. CCD black dot defect compensation
5. USB storage information registration
Note) If replacing the lens, CCD, optical lter, CP-1 board, it is necessary to perform the above 1-5
adjustments again. 2-4 adjustments should be made in the above order.
4. Setup
1) System requirements
• Windows
®
98 or Me, 2000, XP
• IBM-compatible PC/AT with Pentium or higher processor
• CD-ROM drive
• 3.5-inch 2HD diskette drive
• USB port
• 40 MB or more RAM
• Hard disk drive with 15 MB or more memory space
• VGA or SVGA monitor with 256 or more color display
2) Installing calibration software
• Insert the calibration software installation diskette into the diskette drive.
• Open Explorer.
• Copy "DscCaDI_140" folder of the oppy disk drive in any folder on the hard disk.
To Next Page
Loading...
