Problem
PictureProjectdoesnotstartwhen
cameraisconnected
13
13
49
51
Cause/Solution
Cameraisoff.
Batteriesareexhausted.
USBcableisnotcorrectlyconnected.
AppropriateUSB option is not
selected.
Camera is not registered in Device
Manager (Windows only).
See the PictureProject reference man-
ual (on CD) for further information.
Choose correct video mode.
Batteries are low.
Pictures not displayed on television 48
Format memory > Format 13, 70
option not available
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon iscaused by a strong
external static charge. Turn the camera off, remove and replace the batteries, and then
turn the camera on again. In the event of continued malfunction, contact your retailer
or Nikon representative. Note that disconnecting the power source as described above
may result in the loss of any data not recorded to internal memory or the memory card
at the time the problem occurred. Data already recorded will not be affected.
2
z
o
94
To Next Page
Loading...
Need help?
General
