59
Auto Mode
More on Shooting
B Note on Multi-shot 16
Smear (A 128) visible in the monitor when shooting with Multi-shot 16 will be visible in the saved
image data. To reduce smear effects, avoid bright objects such as the sun, reflections of the sun, and
electric lights when shooting.
ISO Sensitivity
When ISO sensitivity is increased, less light is needed when taking pictures.
Higher ISO sensitivity allows darker subjects to be captured. Additionally, even
with subjects of similar brightness, pictures can be taken at faster shutter speeds,
and blurring caused by camera shake and subject movement can be reduced.
• Although higher ISO sensitivity is effective when shooting darker subjects,
shooting without the flash, shooting with the camera zoomed in, etc., images
may contain noise.
The icon for the current setting is displayed in the monitor (A 8). When Auto is
selected, the E icon is not displayed at ISO 80, but is displayed if the ISO
sensitivity automatically increases to more than 80 (A 30).
A (auto) M d (Shooting menu) M ISO sensitivity
Auto (default setting)
Sensitivity is ISO 80 under normal conditions; when lighting is poor and the flash is
off, the camera compensates by raising sensitivity to a maximum of ISO 800.
80, 100, 200, 400, 800, 1600, 3200, 6400
Sensitivity will be locked at the specified value.
• When ISO sensitivity is locked, Motion detection (A 114) does not function.
B Note on ISO Sensitivity
his feature cannot be used simultaneously with certain features. ➝ “Camera Settings that Cannot
Be Set at the Same Time“ (A 61)
B ISO 3200 and ISO 6400
When ISO sensitivity is set to 3200 or 6400, the available Image
mode settings are limited to M 2048×1536, N 1024×768, and
O 640×480. The image mode indicator displayed while shooting
lights in red, and X is displayed next to the ISO sensitivity indicator
in the bottom left of the monitor.
3200
To Next Page
Loading...
Need help?
General
