E64
Reference Section
Slide Show
Play back images, saved in the internal memory or on a memory card, one by one in an
automated “slide show.”
1 Use the multi selector to select Start and
press the k button.
• To change the interval between images, select Frame
intvl, select the desired interval time, and press the k
button before selecting Start.
• To repeat the slide show automatically, select Loop and
press the k button before selecting Start. The check mark
(w) will be added to the loop option when enabled.
2 The slide show begins.
• While the slide show is in progress, press the multi selector
K to display the next image or J to display the previous
image. Hold down either button to fast forward or rewind.
• To end or pause the slide show, press the k button.
3 Choose End or Restart.
• The display at right appears when the last slide is displayed
or the show is paused. Highlight G and press the k
button to return to Step 1, or select F to restart the show.
Press the c button (playback mode) M d button M Slide show M k button
Slide show
Frame intvl
Start
Loop
Pause
To Next Page
Loading...
