I
Step4
Turn
On
the Camera
Press
the power switch
to
turn on the camera.
•
The power-on lamp (green)
will light and then the
monitor
will turn on (the power-on lamp turns
off
when
the
monitor
turns on).
n
Power Saving Function (Auto
Off)
If no operations
are
performed for a while, the
monitor
will turn off, the camera will enter
standby mode, and the power-on lamp will flash .
If
no operations
are
performed for
approximately another three minutes, the camera will turn
off
automatically.
While the camera
is
in
standby mode, the
monitor
turns back on
if
you perform any
of
the
following operations:
---.
Press
the power switch, shutter-release button,
0
(shooting mode) button,
[E]
(playback)
button,
ore
(~
movie-record)
button
.)
First
Steps
To Next Page
Loading...
