E26
Reference Section
4 The camera is automatically turned on.
• The PictBridge startup screen (
1
) is displayed in the camera monitor, followed by the
Print selection screen (
2
).
B If the PictBridge Startup Screen Is not Displayed
When Auto is selected for Charge by computer (E83), it may be impossible to print images with
direct connection of the camera to some printers. If the PictBridge startup screen is not displayed
after the camera is turned on, turn the camera off and disconnect the USB cable. Set Charge by
computer to Off and reconnect the camera to the printer.
Print selection
3 2
15
/
11
/
2013
12
To Next Page
Loading...
