E76
Reference Section
Gesture Control
Set whether or not to enable the gesture control function when you position the monitor
facing forward in the same direction as the camera lens.
This function is available in Portrait and Night portrait scene modes, smart portrait mode,
and A (auto) mode.
B Notes About Gesture Control
• The camera may not detect your palm or hand movement in some shooting conditions.
• When moving your hand, hold up your palm vertically facing the camera, and maintain the same
hand shape as you move it.
• The functions listed below cannot be used when the gesture control function is in use.
• When the monitor is returned to the open rearward-facing position against the back of the
camera, the restricted functions are reset to their original settings (if you did not change the
settings while using the gesture control function).
Press the d button M z menu icon M Gesture control M k button
Option Description
c On (default setting) Gesture control is enabled.
Off Gesture control is disabled.
Restricted function Description
Self-timer (A51), Quick effects
(E48), Smile timer (E50), AF
assist (E79), Digital zoom (E79)
This function cannot be used.
Continuous (E39)
The setting is fixed at Single if Continuous H,
Continuous L, Pre-shooting cache, or BSS is set before
you start using the gesture control function.
AF area mode (E44) The setting is fixed at Target finding AF.
Monitor settings (E73) Photo info is fixed at Show info.
Auto off (E80)
The setting is fixed at 5 min if 30 s or 1 min is set before
you start using the gesture control function.
To Next Page
Loading...
