31
The Basics of Shooting and Playback
Operating the Erase Selected Images Screen
1 Use the multi selector JK to select an image
to be deleted, and then use H to display K.
• To undo the selection, press I to remove K.
• Move the zoom control (A1) toward g (i) to switch to
full-frame playback or f (h) to switch to thumbnail
playback.
2 Add K to all images that you want to delete and then press the k
button to confirm the selection.
• A confirmation dialog is displayed. Follow the instructions displayed in the monitor.
B Deleting Images in a Sequence
• If you press the l button and delete a key picture while only key pictures are displayed for
sequences of images (A71), all images in the sequence, including the key picture, are deleted.
• To delete individual images in a sequence, press the k button to display them one at a time and
press the l button.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
Erase selected images
BackBack
To Next Page
Loading...
