60
Using the Button to Set Image Quality
When Qual is chosen in the Assign FUNC sub-menu, image quality will be as-
signed to the
button, allowing you to adjust image quality without having to
access the camera menus.
1
Pressing the button (A), rotate the main command dial (B) until the desired
image quality (compression ratio) setting is showing in the rear control panel (C).
A
ADVANCED PHOTOGRAPHY—IMAGE QUALITY
For more information on:
pg. 116 The Assign FUNC sub-menu
pg. 8 The rear control panel display (image quality)
B C
A B C
2
Pressing the button, rotate the sub-command dial until the desired combi-
nation of file format (High image quality only), image type, and image size is shown
in the rear control panel.
As the main command dial is rotated, settings will change in the order shown
below (an image quality of JPEG Normal appears in the rear control panel as
NORM).
HI FINE NORM BASIC
Image Quality (continued)
To Next Page
Loading...
