139Recording and Viewing Movies
3 Start recording.
Press the movie-record button to start
recording.
A recording indicator and
the time available are displayed in the
monitor.
Sound is recorded via the
built-in microphone (0 2); be careful
not to obstruct the microphone
during recording.
Except in i and j
modes, exposure can be locked by
pressing the A (L) button (0 113)
or (in scene, P, S, A, and % modes)
altered by up to ±3 EV in steps of
1
/
3 EV
by pressing the E (N) button and
rotating the command dial (0 116;
note that depending on the
brightness of the subject, changes to
exposure may have no visible effect).
4 End recording.
Press the movie-record button again to end recording.
Recording will end automatically when the maximum length
is reached, the memory card is full, or another mode is
selected.
5 End live view.
Press the a button to end live view.
A Taking Photographs During Movie Recording
To end movie recording, take a photograph, and exit to live view, press
the shutter-release button all the way down and hold it in this position
until the shutter is released.
Movie-record button
Recording indicator
Time remaining
To Next Page
Loading...
