12.
Take
up
the
film
slack.
Fold
out the film rewind crank ®
and
rotate it slowly
in
the direction
of
the arrow
on
the film rewind
knob
until you' feel slight resis-
tance.
Then
fold the crank back
in.
13
Make
blank
exposures.
•
To
dispose of the first few frames exposed during film loading,
continue to alternately advance the film
and
depress the shutter release
button until the frame counter
® reaches frame
1.
While making blank
exposures,
check that the rewind knob
is
rotating, indicating the film
has been loaded correctly and
is
advancing. If the knob does not
rotate, reload the film.
-B
efore the frame counter reaches frame I, with the shutter speed/mode selector
dial set
at
A or the
~\.
mark, the shutter fires
at
a fixed speed
of
1/90sec. regard-
less
of
scene brightness.
To
indicate blank expcsures, the shutter speed needle
in
the viewfinder pcints to
e9o.
At a manual shutter speed setting, the shutter fires
at
the speed set
on
the dial although the meter needle will not necessarily point to
that speed.
11
To Next Page
