- BASIC
OPERATION-continued---------------,
10
Engage
the
film
•
perforations
with
the
sprocket
teeth
@ •
rurn the takeup spool slightly with
your thumb,
so
that a perforation
at
the bottom edge of the film
is
engaged with the small tooth at
the bottom of the slot
in
the takeup
spool ,
and
the top
and
bottom per-
forations mesh securely with the
sprockets.
10
11.
Advance
the
film
with
the
film
advance
lever
@ •
Wind the film advance lever and depress the shutter
release button until the film sprockets engage the
perforations
on
the edges of the film. Confirm
that the film
is
properly seated between both film
guide rails
@ and there
is
no film slack.
Then
close
the camera back until it snaps shut.