Nikon FG-20 - Page 9

7. Open the camera
back @ .
Pull up the film rewind knob @ until
the camera back pops open .
8. Install the film
cartridge.
Position the cartridge in the film
cartridge chamber
@ with the
leader pointing towards the takeup
spool
@; then push the rewind
knob back down to hold the car-
tridge
in place.
The FG-20 accepts any type of
35 mm film on the market. During
film loading,
it is advisable to
handle the film
in the shade to
avoid direct exposure to sunlight.
9 Insert the film
• leader into the
takeup spool.
Pull the leader and in sert it into
anyone of the slots in the takeup
spool.
9