- BASIC
OPERATION-continued-----------
22
Depress
the
rewind
buHon
@ •
• When the film reaches the end of the roll,
the film advance lever cannot
be
wound any further.
When
this happens, do not force the film advance
lever any further but prepare to unload the film.
Turn
the camera upside down
and
depress the film
rewind button, so that the exposed film can
be
reo
wound back into its cartridge.
You
don 't have to apply
continuous pressure to the button; just press
it
once .
• If the film rewind button is depressed before the film reaches
the end
of
the roll, advance the film by one frame
in
dark·
ness
or
with the lens cap attached to reset the button.
18
23
Rewind
the
film.
• Fold out the film rewind crank
and
turn it
in
the direction of the arrow.
When
you
feel the tension
lessen, give
it
a few more turns until the crank turns
freely, indicating the film leader is rewound completely
back into the cartridge.