20
Take
the
picture.
•
To
take a shot, trip the shutter
by
pushing
the
shutter release button
all
the way down; apply
light but steady pressure with the ball of your index
finger to
avoid camera shake which might result
in
blurred images.
·If
you
trip the shutter in darkness
or
with the lens cap
attached, the shutter remains open.
In
this case, reset the
shutter speed/mode selector dial to a manual setting.
21
Advance
the
film.
• Stroke the film advance lever to
transp~
'
rt
the film to the next frame.
·If
the lever becomes difficult
to
operate
at
the beginning
of
the roll, this menas that the film is not winding onto the take-
up spool properly.
In
this case, rewind the film immediately
and load it again.
17
To Next Page
Loading...
