Top
warning LED
Shutter speed LEDs
Bottom warning LED
Flash ready-light
Red
LEDs (light emitting diodes) located opposite the
shutter speed scale at the right-hand side of the
view-
finder light
up
when the shutter release button
is
depressed halfway. These function
in
three capa-
cities-for
exposure information, for improper expo-
su
re
warning, and for convenient flash shooting.
22
Exposure information
on
P or A
on manual
Exposure
information
~~~
=
Blinking
LED
• = Steadily
lighting
LED
On
P or
A,
a steady
LED
indicates the shutter speed
automatically set.
Two
adjacent LEDs indicate set
speed
is
intermediate between the two.
On
manual,
a steady
LED
indicates the shutter speed set manually
and the blinking LED(s) signals the correct speed to
match the selected aperture.
Notes:
1)
At
M90
and
B,
there is no LEO display.
2) Shutter speed selection
is
stepless on P and A, however
on
manual, intermediate speeds cannot be set.
To Next Page
Loading...
