Nikon GP-1A User Manual

En
9
Connecting the Optional MC-DC2
Connecting the Optional MC-DC2
An optional MC-DC2 remote cord for remote
shutter release can be connected to the GP-1A
accessory terminal (햵). When connecting the
MC-DC2, be sure the connector is in the correct
orientation; do not use force.
Mounting the GP-1A on the Camera
Mounting the GP-1A on the Camera
Page 1 of 2
Page 1 of 2
The Camera Accessory Shoe
The Camera Accessory Shoe
The GP-1A is equipped with a mount (햶) that fi ts
the camera accessory shoe.
Slide the GP-1A onto
the camera accessory shoe as shown.
D
D
Disconnecting the GP-1A
Disconnecting the GP-1A
Turn the camera off , disconnect the cable, and
then replace the ten-pin terminal cap or close the
accessory terminal cover.

Nikon GP-1A Specifications

General

Brand	Nikon
Model	GP-1A
Category	Camera Accessories
Language	English