Supported Cameras
The GP-1A can be used with the following cam-
eras:
Required cable
D4, D3-series, D800, D800E,
D700, D300-series, D2X, D2XS,
D2HS, D200
GP1-CA10A
D90, D7000, D5100, D5000, D3100 GP1-CA90
GP1-CA10A cable for ten-
pin remote terminals
GP1-CA90 cable for
accessory terminals
Turning the GP-1A on and Off
Turning the GP-1A on and Off
The GP-1A is not equipped with a battery or on/
off switch: power is supplied from the camera.
The GP-1A turns off only when the cable con-
necting it to the camera is disconnected; even
when the camera is off , the GP-1A continues to
receive GPS data.
For more information, see “Re-
cording GPS Data” (page 13).
To Next Page
Loading...
Need help?
General
