14
9
Insert the eyepieces into the eyepiece sleeves.
Be sure that it is inserted all the way until it touches the end of the sleeve.
Note) When inserting the eyepiece, hold the rubber cover of the eyepiece.
Holding the diopter ring causes a failure. Especially, be careful
with the 10X eyepieces because their rubber covers obstruct the
view of the sleeve end.
10
The hexagonal wrenches and clamp tool can be stored in the
pillar of the stand.
Refer to the figures on p.9 and p.11.
Assembly
II
To Next Page
Loading...
